Otis in the Suburbs (2 Viewers)

[Mr. Pickles]

before

after

Looks sharp, but art needs to be behind glass.

 

[BroncoFreak_2K3]

before

after

your mantle is crooked....

 

[SuperAwesomeDude]

bob, that looks like you just put a board on the wall.

 

[Premier]

before

after

Top-5 all-time FFA thread.

 

[Mr. Pickles]

I need to replace a disposal. Should I blog it up?

 

[Steve Tasker]

before

after

 

[Garrett]

before

after

Now paint that white.

 

[Sconch]

I need to replace a disposal. Should I blog it up?

Have fun.

 

[Ignoramus]

I'm fine with open wall space, that just looks like too big a step down from the zebrawood on the right to me. If you like it, more power to you.

Fair enough. Different perspective on it (pic taken from standing in the kitchen)http://i280.photobucket.com/albums/kk161/offdee/FBG/IMG_3126.jpg

Glass over the zebrawood?

W.T.F.

I was wondering why he hangs his cutting boards on the wall...

 

[Britney Spears]

Nice looking place. That zebra wood art is crooked however, and would drive me nuts.

Yep. I think you need to align your "art" properly before you can have an attitude about it.

Dead nuts fellas.http://i280.photobucket.com/albums/kk161/offdee/FBG/IMG_3128.jpg

Sure looks like that bubble is closer to the left hash than the right to me. It's also possible the frame is not square. Try the level on the right vertical, that's where it's clearly crooked.

 

[Britney Spears]

before

after

HFS this is awesome.

 

[Britney Spears]

I need to replace a disposal. Should I blog it up?

Can you take photos and document the steps to do this? Dead serious.

 

[offdee]

Nice looking place. That zebra wood art is crooked however, and would drive me nuts.

Yep. I think you need to align your "art" properly before you can have an attitude about it.

Dead nuts fellas.http://i280.photobucket.com/albums/kk161/offdee/FBG/IMG_3128.jpg

Sure looks like that bubble is closer to the left hash than the right to me. It's also possible the frame is not square. Try the level on the right vertical, that's where it's clearly crooked.

It's as square as Larry Boy.http://i280.photobucket.com/albums/kk161/offdee/FBG/IMG_3143.jpg

 

[corpcow]

before

after

Are you sure you don't need a frame with glass?:rofl:

 

[Britney Spears]

Nice looking place. That zebra wood art is crooked however, and would drive me nuts.

Yep. I think you need to align your "art" properly before you can have an attitude about it.

Dead nuts fellas.http://i280.photobucket.com/albums/kk161/offdee/FBG/IMG_3128.jpg

Sure looks like that bubble is closer to the left hash than the right to me. It's also possible the frame is not square. Try the level on the right vertical, that's where it's clearly crooked.

It's as square as Larry Boy.http://i280.photobucket.com/albums/kk161/offdee/FBG/IMG_3143.jpg

a) Still looks like the bubble is closer to the left (not centered). b) Is that level like 5" long? It looks tiny. It might be time to invest in a 24" box level.

 

[Ignoramus]

Nice looking place. That zebra wood art is crooked however, and would drive me nuts.

Yep. I think you need to align your "art" properly before you can have an attitude about it.

Dead nuts fellas.http://i280.photobucket.com/albums/kk161/offdee/FBG/IMG_3128.jpg

Sure looks like that bubble is closer to the left hash than the right to me. It's also possible the frame is not square. Try the level on the right vertical, that's where it's clearly crooked.

It's as square as Larry Boy.http://i280.photobucket.com/albums/kk161/offdee/FBG/IMG_3143.jpg

a) Still looks like the bubble is closer to the left (not centered). b) Is that level like 5" long? It looks tiny. It might be time to invest in a 24" box level.

Really need a 4' level to be sure.

 

[Mr. Pickles]

I need to replace a disposal. Should I blog it up?

Can you take photos and document the steps to do this? Dead serious.

I decided to seal the leaks with silicone adhesive. I'm not sure if this will work, but it's worth a shot. I'm putting a rubbermaid container under it in case it doesn't hold up.I did have to take it down in order to do this, though. It wasn't too bad. First thing is to unplug it. Second, remove the dishwasher tubing (smaller tubing entering above the main drain outlet pipe). Third, remove the drain pipe. Mine unscrews PVC from the unit. It's pretty easy. Lastly, disengage the retaining collar that holds it to the sink (yours may require removing screws, but most just allow you to rotate the large metal collar). You have to turn that counterclockwise to unseat it.Reinstalling just does this in reverse.

 

[Otis]

I need to replace a disposal. Should I blog it up?

Can you take photos and document the steps to do this? Dead serious.

I decided to seal the leaks with silicone adhesive. I'm not sure if this will work, but it's worth a shot. I'm putting a rubbermaid container under it in case it doesn't hold up.I did have to take it down in order to do this, though. It wasn't too bad. First thing is to unplug it. Second, remove the dishwasher tubing (smaller tubing entering above the main drain outlet pipe). Third, remove the drain pipe. Mine unscrews PVC from the unit. It's pretty easy. Lastly, disengage the retaining collar that holds it to the sink (yours may require removing screws, but most just allow you to rotate the large metal collar). You have to turn that counterclockwise to unseat it.Reinstalling just does this in reverse.

subscribe

 

[Britney Spears]

I need to replace a disposal. Should I blog it up?

Can you take photos and document the steps to do this? Dead serious.

I decided to seal the leaks with silicone adhesive. I'm not sure if this will work, but it's worth a shot. I'm putting a rubbermaid container under it in case it doesn't hold up.I did have to take it down in order to do this, though. It wasn't too bad. First thing is to unplug it. Second, remove the dishwasher tubing (smaller tubing entering above the main drain outlet pipe). Third, remove the drain pipe. Mine unscrews PVC from the unit. It's pretty easy. Lastly, disengage the retaining collar that holds it to the sink (yours may require removing screws, but most just allow you to rotate the large metal collar). You have to turn that counterclockwise to unseat it.Reinstalling just does this in reverse.

subscribe

Yeah seriously. This is great info. I'll have to replace one when I do my kitchen. Maybe I'll video it.

 

[corpcow]

Hung mirrors today (the one in the photo below which is pretty sweet and one in the bedroom). With any luck, they won't come crashing down any time soon. Plus, we did some gardening - well, mostly the wife and mother in law. Shaping up.

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/252814_781280804950_10911337_39541093_5996580_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/250294_781280485590_10911337_39541086_1108642_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/248044_781281773010_10911337_39541112_4090120_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/251444_781281753050_10911337_39541111_988004_n.jpg

Oh, and here's perhaps one of the biggest reasons we moved to the 'burbs.

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/216287_768729572720_10911337_39379536_711962_n.jpg

(We're now totally full, another rack has been ordered).

 

[The Commish]

before

after

Now paint that white.

 

[Premier]

Corpcow > nice place dude

 

[urbanhack]

I don't understand the wood in a frame shtick. Somebody explain.

I'm not a fan but I can see how someone would like how the texture broke up the room. However, I think putting it behind glass looks horrible. You're not trying to protect a Picasso here.

big fan of actually seeing the texture.

 

[corpcow]

Corpcow > nice place dude

Thanks. Though, Pittsburgh (when we were budgeting for a place in NYC) + a wife with good taste == nice place White trim and other contrast is still key, IMO.

 

[OC Zed]

before

after

:style:

 

[Steve Tasker]

Corpcow > nice place dude

Seriously....wow

 

[ODoyleRules]

before

after

awesome

 

[Sconch]

I need to replace a disposal. Should I blog it up?

Can you take photos and document the steps to do this? Dead serious.

I decided to seal the leaks with silicone adhesive. I'm not sure if this will work, but it's worth a shot. I'm putting a rubbermaid container under it in case it doesn't hold up.I did have to take it down in order to do this, though. It wasn't too bad. First thing is to unplug it. Second, remove the dishwasher tubing (smaller tubing entering above the main drain outlet pipe). Third, remove the drain pipe. Mine unscrews PVC from the unit. It's pretty easy. Lastly, disengage the retaining collar that holds it to the sink (yours may require removing screws, but most just allow you to rotate the large metal collar). You have to turn that counterclockwise to unseat it.Reinstalling just does this in reverse.

I've installed at least 4 or 5 disposals in my life (don't ask). The straight-forward installation isn't bad but there always seems to be one thing that goes wrong...the collar, the wiring, the pipes etc.

 

[Sconch]

Adolf Loos would be turning over in his grave.

 

[Mr. Pickles]

I need to replace a disposal. Should I blog it up?

Can you take photos and document the steps to do this? Dead serious.

I decided to seal the leaks with silicone adhesive. I'm not sure if this will work, but it's worth a shot. I'm putting a rubbermaid container under it in case it doesn't hold up.I did have to take it down in order to do this, though. It wasn't too bad. First thing is to unplug it. Second, remove the dishwasher tubing (smaller tubing entering above the main drain outlet pipe). Third, remove the drain pipe. Mine unscrews PVC from the unit. It's pretty easy. Lastly, disengage the retaining collar that holds it to the sink (yours may require removing screws, but most just allow you to rotate the large metal collar). You have to turn that counterclockwise to unseat it.Reinstalling just does this in reverse.

I've installed at least 4 or 5 disposals in my life (don't ask). The straight-forward installation isn't bad but there always seems to be one thing that goes wrong...the collar, the wiring, the pipes etc.

I think the biggest issue would be getting a good seal between the sink and disposal opening. That requires that the gasket is decent and that the collar is actually tight. People are probably also very bad with hose clamps, so I could see that being another potential problem. I work with a high vacuum system that requires 10 micron vacuum levels. Once you've dickered with that kind of system, plumbing is pretty much a joke.

 

[the moops]

Oh, and here's perhaps one of the biggest reasons we moved to the 'burbs.http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/216287_768729572720_10911337_39379536_711962_n.jpg(We're now totally full, another rack has been ordered).

Is wine illegal in the city?

 

[the moops]

I work with a high vacuum system that requires 10 micron vacuum levels.

Only 10? Pfft

 

[YSR]

Going to sound silly, but if you haven't invested in a rake yet, get the metal teeth. Not the plastic. Mr. YSR and I are doing yardwork on our 1 acre this weekend (after two years of neglect) and his metal teeth rake is kicking my plastic teeth rake's ###.

 

[corpcow]

Oh, and here's perhaps one of the biggest reasons we moved to the 'burbs.http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/216287_768729572720_10911337_39379536_711962_n.jpg(We're now totally full, another rack has been ordered).

Is wine illegal in the city?

No, but living in NYC (at least in anything I could afford) did not allow me to store 300-400 bottles of wine, and certainly not with proper conditions. We don't have an active cooling system now, but our basement is below grade so it's ~55-60 down there even with the vents shut.

 

[gandalas]

Just joining the thread, so this may have been answered already, but for the Lawnmower, I went with the Earthwise Electric Mower plus 100 foot outdoor Extension cord.

Never have to worry about gas or starting issues...no maintenance required on the engine with electrical either.

http://www.amazon.com/gp/product/B001DZJYIK

http://www.amazon.com/gp/product/B00004SQF5

 

[Koya]

Good day for the Burbs when this is a couple

hundred feet from your doorstep. Long Island at it's best.

http://m1102.photobucket.com/albumview/albums/Koya47/Mobile%20Uploads/IMG_5249.jpg.html?pbauth=1_uLEBonVPfaLdh1h3YMYz2Y2PwY%2BBiKWh4MysoisINAlDXxJWnHGAz8yKBbhbzKTlgsAxllBFyaKj7gBcZd%2FEaSkJeNUnetooVsb4HSlsdzAG2gQnVZIC6D1%2FWiVON31eNgkFhbXl%2BpdEqhqBwax5bds2z%2FPPENv1

 

[Otis]

I need to replace a disposal. Should I blog it up?

Can you take photos and document the steps to do this? Dead serious.

I decided to seal the leaks with silicone adhesive. I'm not sure if this will work, but it's worth a shot. I'm putting a rubbermaid container under it in case it doesn't hold up.I did have to take it down in order to do this, though. It wasn't too bad. First thing is to unplug it. Second, remove the dishwasher tubing (smaller tubing entering above the main drain outlet pipe). Third, remove the drain pipe. Mine unscrews PVC from the unit. It's pretty easy. Lastly, disengage the retaining collar that holds it to the sink (yours may require removing screws, but most just allow you to rotate the large metal collar). You have to turn that counterclockwise to unseat it.Reinstalling just does this in reverse.

I've installed at least 4 or 5 disposals in my life (don't ask). The straight-forward installation isn't bad but there always seems to be one thing that goes wrong...the collar, the wiring, the pipes etc.

I think the biggest issue would be getting a good seal between the sink and disposal opening. That requires that the gasket is decent and that the collar is actually tight. People are probably also very bad with hose clamps, so I could see that being another potential problem. I work with a high vacuum system that requires 10 micron vacuum levels. Once you've dickered with that kind of system, plumbing is pretty much a joke.

Plasma Enhanced Chemical Vapor Deposition?

 

[Mr. Pickles]

I need to replace a disposal. Should I blog it up?

Can you take photos and document the steps to do this? Dead serious.

I decided to seal the leaks with silicone adhesive. I'm not sure if this will work, but it's worth a shot. I'm putting a rubbermaid container under it in case it doesn't hold up.I did have to take it down in order to do this, though. It wasn't too bad. First thing is to unplug it. Second, remove the dishwasher tubing (smaller tubing entering above the main drain outlet pipe). Third, remove the drain pipe. Mine unscrews PVC from the unit. It's pretty easy. Lastly, disengage the retaining collar that holds it to the sink (yours may require removing screws, but most just allow you to rotate the large metal collar). You have to turn that counterclockwise to unseat it.Reinstalling just does this in reverse.

I've installed at least 4 or 5 disposals in my life (don't ask). The straight-forward installation isn't bad but there always seems to be one thing that goes wrong...the collar, the wiring, the pipes etc.

I think the biggest issue would be getting a good seal between the sink and disposal opening. That requires that the gasket is decent and that the collar is actually tight. People are probably also very bad with hose clamps, so I could see that being another potential problem. I work with a high vacuum system that requires 10 micron vacuum levels. Once you've dickered with that kind of system, plumbing is pretty much a joke.

Plasma Enhanced Chemical Vapor Deposition?

No, it's not a UHV system. It's a Schlenk line for air-free inorganic synthesis. Or as MasterOfGolddigger would say, "that made up thing that I pretend to work on."

 

[Otis]

Corpcow > nice place dude

This. All those awesome moldings and wainscoting make me hate our place and realize how much more work it really needs.

 

[Mr. Pickles]

Corpcow > nice place dude

This. All those awesome moldings and wainscoting make me hate our place and realize how much more work it really needs.

That is some fancy stuff, but it gets to be a little too ornate for my taste. You've also got a little one running around. You need something a little more kid-friendly. I'm in the same boat. We're looking at houses currently.

 

[Otis]

You've also got a little one running around. You need something a little more kid-friendly. I'm in the same boat. We're looking at houses currently.

:hifife:Never thought I would see this post from Mr. Pickles to Otis.

 

[urbanhack]

We painted the trim the same color as the walls with hardwood floors.

OOF

http://imageshack.us/m/829/2118/img0768mg.jpg

So white trim would have been better?????

1000 times better, friend.

Sorry...forgot to mention that i do have a light colored trim on the walls with custom painted orange patterns.

 

[St. Louis Bob]

We painted the trim the same color as the walls with hardwood floors.

OOF

http://imageshack.us/m/829/2118/img0768mg.jpg

So white trim would have been better?????

1000 times better, friend.

Sorry...forgot to mention that i do have a light colored trim on the walls with custom painted orange patterns.

Nice pad!

 

[OC Zed]

Sorry...forgot to mention that i do have a light colored trim on the walls with custom painted orange patterns.

Very nice, but it could use a touch of zebra wood.

 

[Steve Tasker]

Nice place, Otis.

 

[desert rose]

Sorry...forgot to mention that i do have a light colored trim on the walls with custom painted orange patterns.

How do you mount the TV on the wall without wires hanging down. I want to do that!

 

[Steve Tasker]

Sorry...forgot to mention that i do have a light colored trim on the walls with custom painted orange patterns.

How do you mount the TV on the wall without wires hanging down. I want to do that!

Drill holes in the wall and run the wires through there? My parents did that, looks nice.

 

[Reaper]

I've found that Cutter Bug Free Backyard spray works better than citronella.

Thats what I use and it works great. The one that hooks up to your hose.

Spend one evening outside with a thermacell unit running and I guarantee you'll never mess around with all that stuff again. I've bowhunted in southern Georgia in early September with swarms of bugs and Mosquitos around me and a thermacell next to me. Not one bite and it clears the area. We use one all summer long on our back deck and never have a problem. All friends/neighbors who come to our house end up buying them as well. They work

Can you recommend one? I'm looking and only see one that goes on your belt and a lantern looking one.

My yard becomes inhabitable once the summer really kicks in.

Edit.. I think I found itThermacell

Just oredered 3 of em with replacement cartridges from Amazon - Looks like a lot of good reviews too

I'm going all out this summer - Spray every few weeks plus these things... I think we have some swamps in the area.

Yep, that's it. I have one of the lantern style ones that we use on the deck (keeps our entire 2 level deck free from bugs) and we have 2 of the hand-held units like you bought. You will be very pleased.Otis: Here is the company website: http://www.mosquitorepellent.com/home-away-specials.asp They run on little butane cartridges and replaceable pads that have a chemical that is found in chrysanthemum flowers. It emits a very light wisp of smoke that does wonders. Turn it on 15 minutes before you're going to hang outside and no more bugs.

This morning sprayed that Cutter stuff everywhere. Also got a couple citronella candles and this Off thing where you burn this coil of stuff and it lets off a smoke and lasts four hours. Burning that now. But I will keep my eyes peeled for this Thermacell thing.

Spent some time this weekend on the North Fork (NOFO) and then at a local BBQ in south nassau where the host said "ohhhhhhhhh I never get bugz!!!!!"

The bugs are definitely nippin... people were breaking out the OFF and Avon stuff.

CAN'T WAIT! for my shipment! I kept saying.... Damn..... If I only had my thermacell unit.

 

[corpcow]

Corpcow > nice place dude

This. All those awesome moldings and wainscoting make me hate our place and realize how much more work it really needs.

The crown molding was not expensive and made a huge difference. We had it on half the house, and we ended up putting it in the rest of the house including the second floor. For a 3k sq ft house, and doing let's say about half of it, it was like $700 total including tax and delivery. (It took our contract about 2 days to paint and install everything, so let's say $1,200 tops installed. The wainscoting/chair rails were there but I'm told those are equally cheap and easy to install.We had the luxury of a 4 yr old house that was otherwise a blank canvas - the family who bought it went through a messy divorce shortly after moving in. That also means there was some basic maintenance not done when we had bought it in Dec, but it was barely lived.

 

[ArcticEdge]

Otis, you buy a pet yet? Cause if you get a turtle, heads will explode in here. (big and little ones apparently)